How to Use Walk Assist on Model 1.0
Denago’s City 1.0 E09 Step-over and E10 Step-thru models offer a built-in walk assist mode. You can use the walk assist mode to let the electric motor help you push the ebike (for example, when pushing the ebike up a steep hill.)
When walk assist mode is turned on, the ebike will travel at 6 Km/h (about 3.7 MPH.)
How to use walk assist mode
- Make sure the ebike is powered on
- Press and hold the “DOWN” button on the HMI remote for 2 seconds. The ebike begins to move forward as long as you hold the button.
- To exit walk assist mode, release the “DOWN” button or squeeze the brake levers.